امروز پنجشنبه ۳۰ فروردین ۱۴۰۳
اگر به یک وب سایت یا فروشگاه رایگان با فضای نامحدود و امکانات فراوان نیاز دارید بی درنگ دکمه زیر را کلیک نمایید.
ایجاد وب سایت یادسته بندی سایت
محبوب ترین ها
پرفروش ترین ها
پر فروش ترین های فورکیا
پر بازدید ترین های فورکیا
برچسب های مهم
آمار بازدید سایت
پیوند ها
مقاله جوشکاری با عنوان : The effects of the welding current on heat input, nugget geometry, and the mechanical and fractural properties of resistance spot welding on Mg/Al dissimilar materials
Fatih Hayat
چکیده :
Investigating the joining capability of magnesium AZ31 alloy sheets and aluminium 1350 alloy sheets
with the application of resistance spot welding was the objective of this study. The weld current values
used in the welding process of Al–Mg sheets were 22, 23, 25, 27, 29, 31, and 33 kA. The studies examined
the nugget geometries of joined specimens, recorded the scanning electron microscopy (SEM) images of
the welded zone and the fracture surface, and recorded the energy-dispersive spectroscopy (EDS, semiquantitative)
analyses. The results of the experiment confirmed that nugget geometry was different for
the Al and Mg sides. Tensile shear tests carried out on the welded joints determined their strength and
failure mode. The increase in the weld current and duration resulted in an increase in the nugget size
and the weld strength. According to observations, the tensile load bearing capacity (TLBC) increased
up to 29 kA of the weld current value. It was also found that tearing during fracture occurred in two different
ways.
مبلغ قابل پرداخت 2,000 تومان
برچسب های مهم