تماس با ما

فید خبر خوان

نقشه سایت

فروشگاه جامع تحقیقات و مقالات و منابع مهندسی مکانیک


اگر به یک وب سایت یا فروشگاه رایگان با فضای نامحدود و امکانات فراوان نیاز دارید بی درنگ دکمه زیر را کلیک نمایید.

ایجاد وب سایت یا
فروشگاه حرفه ای رایگان

دسته بندی سایت

پر فروش ترین های فورکیا


پر بازدید ترین های فورکیا

برچسب های مهم

آمار بازدید سایت

پیوند ها

آمار بازدید

  • بازدید امروز : 11
  • بازدید دیروز : 87
  • بازدید کل : 246927

مقاله جوشکاری Effects of Welding Parameters and Surface Pretreatments on Resistance Spot Welding of AZ31B Mg Alloy


مقاله جوشکاری با عنوان :

Effects of Welding Parameters and Surface Pretreatments on Resistance
Spot Welding of AZ31B Mg Alloy

Shiquan Zhou1, Lei Liu2,3, Jae Pil Jung4,*, Mok-Young Lee5, and Y. Norman Zhou3

چکیده :

The resistance spot weldability of AZ31B magnesium alloy using AC (alternating current) was investigated
in this paper. The surfaces of sheet coupons were prepared by acetone cleaning (as-received) and some coupons
were also cleaned with chromic acid (H2Cr2O7) after acetone cleaning (acid-cleaned). The surfaces of the
as-received AZ31B sheets consisted of MgO, Mg(OH)2, and MgCO3. The extent and thickness of the surface
oxide/reaction layer of the sheets varied according to the fabrication process of the sheets, and resulted in
different contact resistance. Effects of welding current and weld time were investigated while the electrode
force was kept constant. The results indicated that the as-received sheets produced expulsion both at the
faying surface and at the work piece/electrode interface due to high contact resistance. Diluted chromic acid
cleaning reduced contact resistance and produced good weld quality. Increasing the welding current and weld
time enhanced not only the nugget size and joint strength, but also increased indentation on the weld surfaces.
A weld lobe was established considering the minimum joint strength, weld expulsion, and surface indentation
based on a relevant American Welding Society Standard.


مبلغ قابل پرداخت 2,000 تومان

توجه: پس از خرید فایل، لینک دانلود بصورت خودکار در اختیار شما قرار می گیرد و همچنین لینک دانلود به ایمیل شما ارسال می شود. درصورت وجود مشکل می توانید از بخش تماس با ما ی همین فروشگاه اطلاع رسانی نمایید.

Captcha
پشتیبانی خرید

برای مشاهده ضمانت خرید روی آن کلیک نمایید

  انتشار : ۲۵ تیر ۱۳۹۴               تعداد بازدید : 1672

برچسب های مهم


مطالب تصادفی

  • آموزش تصویری کتاب اینترچنج 3 (Interchange3) توسط مهندس باقری
  • آموزش تصویری کتاب اینترچنج 2 (Interchange2) توسط مهندس باقری
  • Simulation of ODE/PDE Models with MATLAB, OCTAVE and SCILAB
  • Linear Control Systems with solved problems and MATLAB examples
  • MATLAB Codes for Finite Element Analysis

تمام حقوق مادی و معنوی این وب سایت متعلق به "" می باشد